192
16-7-5. To Upgrade OU
Select FILE=>MU/OU while pressing and holding down the FILE button. Turn F1 to
select the file extension OUA while pressing and holding down the FILE button. The OUA
files are recognized by the OU as the OU upgrade files.
Turn F2 to select the OUA file to be downloaded.
Press F3 to send (download) the selected upgrade file to the OU.
IMPORTANT
DO NOT turn power OFF at your units or try to remove the CF card from the card drive
until file download is complete!
"FLASH ERASE" will appear on the screen, indicating flash ROM data being erased.
"FLASH WRITING" will appear on the screen, indicating data is being written to OU flash
ROM.
Software upgrade is applied successfully when the start-up screen appears. If an error
occurs, "VERSION UP ERROR" will appear on the screen.
16-7-6. Loading Setting Data
All menu settings previously made for the MU and OU can be set again by loading the
"data.all" file from the CF card.
Insert the CF card, where the data is saved, into the card drive.
Press the FILE button to display the first page of the FILE menu.
In the FILE menu, set the file extension TYPE to ALL.
When there are multiple files in the FILE menu, turn the F2 to select the file to be sent.
(The file name will be "data.all" if it has not been changed.)
Press F3 to load the data. Then a "beep" sound will be heard and the data is loaded from
the CF card.
"SEND" on the screen will start flashing, indicating data is being sent from the OU to MU.
After about a half min. the data transmission will be finished.
The loaded data will be applied to the MU and OU after rebooting MU . (MU power OFF
then power ON.
IMPORTANT
Once the saved system data is loaded, you will have to restart both MU and OU. (Each
power off then power ON.) The Arcnet ID is applied only after the units are restarted.
Summary of Contents for HVS-12ROUA
Page 25: ...11 Circuit Max voltage 40V External Device HVS 3800HS S Max load current 100mA...
Page 240: ......
Page 248: ......
