FOR-A HVS-12ROUA, Installation And Operation Manual

Page: 229 / 250

13
DVE MODIFY (3/8) menu CROP button
Submenu Parameter Default Setting Range Refer to
FADE LEVEL 0.0 0.0 to 100.0
PERSP 1000 0 to 7999 8-2-2
CROP
ENABLE ON OFF, ON
8-2-4
TOP 0.0 0.0 to 100.0
BOTTOM 0.0 0.0 to 100.0
LEFT 0.0 0.0 to 100.0
RIGHT 0.0 0.0 to 100.0
ALL 0.0 0.0 to 100.0
DVE MODIFY (4/8) menu (option) WARP button
Submenu Parameter Default Setting Range Refer to
WARP
TYPE OFF
PGTURN, HZTURN, VZTURN, QDTURN,
PGROLL, HZROLL, VZROLL, QDROLL,
WAVE, ACCORD, SPLIT, XSPLIT, BURST,
STREAM, SW WIN, RIPPLE, LENS,
SPHERE, SCREW1- 4, STRM1 to 12,
MULTI, PIZZA, BEVEL, W DROP
8-2-5
LEVEL (Varies depending on the WARP type)
* DIR (Varies depending on the WARP type)
* RAD (Varies depending on the WARP type)
* ROLL 0 -7999 to 7999
* QUAD
X OFF OFF, -7999 to 7999
Y OFF OFF, -7999 to 7999
* GAP SIZE 0 -8000 to 1000
* SIDE1
X 0 -1000 to 1000
Y 0 -1000 to 1000
* SIDE2
X 0 -1000 to 1000
Y 0 -1000 to 1000
SIDE BORDER OFF OFF, ON (When TYPE is set to PIZZA.)
* Note that the available setting parameters and setting ranges vary depending on the WARP type. Only the
required parameters are displayed in the menu when the WARP type is selected.
DVE MODIFY (5/8) menu BORDER button
Submenu Parameter Default Setting Range Refer to
BORDER
EDGE SOFT OFF OFF, 1 to 15
8-2-6
SELECT OFF OFF, ON
OUTSIDE
X 0.0 0.0 to 20.0
Y 0.0 0.0 to 20.0
X/Y 0.0 0.0 to 20.0
BORDER
SOFT
X OFF OFF, 1 to 15
Y OFF OFF, 1 to 15
X/Y OFF OFF, 1 to 15
INSIDE
X 0.0 0.0 to 100.0
Y 0.0 0.0 to 100.0
X/Y 0.0 0.0 to 100.0
DVE MODIFY (6/8) menu TRAIL button
Submenu Parameter Default Setting Range Refer to
TRAIL
TYPE OFF OFF, DECAY, STAR, B-DECAY, B-STAR
8-2-7
LENGTH 1 1 to 6
BORDER
COLOR
SAT 0.0 0.0 to 100.0
LUM 100.0 0.0 to 100.0
HUE 0.0 -7_359 to 7_359
MONO
COLOR
ENABLE OFF OFF, ON
COLOR
SAT 0.0 0.0 to 100.0
HUE 0.0 -7_359 to 7_359