Foma D902iS, Manual

Page: 135 / 517

133
So
unds/Di
s
plays
/L
igh
ts Settings
■
Other sound settings
･
Setting the mail ring alert or lighting, etc.
☛
P260
･
Setting to sound the ring alert only from the earphone when connecting a flat type earphone/microphone
set with switch (optional)
☛
P388
Using vibrator to signal incoming calls and alarms
Vibrator Setting
The reception of call, PushTalk call, mail, Message R/F, etc. or the date and time set in Alarm Clock or
Scheduler is indicated by vibraton. In addition, the vibrator operation by i- α ppli can be allowed/rejected.
･
When the vibrator is set to Terminal setting in Alarm Clock, this setting of Alarm clock will be valid.
･
The settings of this function are reflected to the settings of Call Alert, Videophone Alert, PushTalk Alert, Mail
Alert, Chat Mail Alert, Message Alert, and Vibrate Effect for i- α ppli.
･
Note that if FOMA terminal is placed on a desk, etc. with Vibrator Setting on, the vibrations of the vibrator
operation may cause it to fall off.
Setting the operation of vibrator for incoming calls
1
m8131
■ Setting the operation for incoming mails/messages:
m8132
■ Setting the operation while an alarm is sounding:
m8133
■ Setting the operation while using i-
α
ppli:
m8134 z
Go to Step 3
2
1
to
3
･
To set the operation for incoming mails/messages:
1
to
4
However, if Alert setting is set to Same: Mail setting in Chat Mail Alert, Chat M vibrate alert cannot be set.
･
To set the operation while an alarm is sounding:
1
or
2
3
Press any of
1
to
5
･
To set the operation while using i-
α
ppli:
1
or
2
･
If you set to Pattern A , the terminal vibrates as follows: about 0.7 second vibration → about 0.7 second
pause → about 0.7 second vibration → about 1.5 second pause (repeated)
･
If you set to Pattern B , the terminal vibrates as follows: about 1 second vibration
→
about 2 second pause
(repeated)
･
If you set to
Pattern C
, the terminal vibrates as follows: about 0.7 second vibration → about 0.7 second
pause (repeated)
･
If you set to Sync melody , the terminal vibrates along with the melody set as ring alert, alarm clock sound
or schedule alarm sound. Note that it may not vibrate depending on melodies. In addition, vibration may
not synchronize with the theme.
･
If you set to OFF , the terminal does not vibrate.
･
The vibrator operates by the highlighted pattern except when Sync melody or OFF is highlighted.
･
When Call vibrate alert is set, (when the call alert volume is set to silent , ) is indicated on the
standby display.
■ Priority of vibrator
When the vibrator is set in multiple functions, the vibrator operates by priorities given below:
a
Alert by Contact of the FOMA terminal phonebook
b
Alert/Image by Group of the FOMA terminal phonebook
c
Vibrator Setting
･
The vibration when receiving a PushTalk call conforms to the setting of Vibrator Setting.
Default Call vibrate alert, V.phone vibe alert, P-Talk vibrate alert, Mail vibrate alert, Chat M vibrate alert,
Msg R vibrate alert, Msg F vibrate alert, Alarm clock, Schedule reminder: OFF i-
α
ppli effect: ON
Example
Next
Vibrator Se
tting