Foma D902iS, Manual

Page: 501 / 517

16
3
Enter any connection name in
名前
z
Click
OK
4
Enter a fictional phone number (such as 0) for
電話番号
, select
FOMA D902iS
from
接続
方法 (Connection procedure)
z
Click
OK
･
Since 市外局番 (Area code) does not effect the
dialup connection (APN) setting, it is not
necessary to change.
5 Click キャンセル when the connection
screen appears
6 Enter the dialup connection (APN)
z
Press
･
Enter in the format “AT+CGDCONT =<cid>,
“PPP”, “APN””.
If
OK
appears, the dialup connection (APN) has
now been set.
■ Resetting the dialup connection (APN)
settings:
･
The settings are restored to the default
settings for <cid> = 1 and 3, and the
settings for <cid> = 2, 4 to 10 are
cleared.
■ Checking the dialup connection (APN)
settings:
■ When nothing is displayed even if AT
command is entered: ATE1
･
For details
☛
P28
7 Check that
OK
is displayed and click
ファイル and ハイパーターミナルの終
了
(End HyperTerminal)
･
After
現在、接続されています。切断してもよ
ろしいですか？
(Connecting now. Disconnect?)
appears, click
はい
･
“XXX”
と名前付けされた接続を保存しますか
?
(Save the connection named “XXX”?) appears.
Click
いいえ
.
The dialup connection (APN) for packet
communication can be set for registration numbers
between cid1 to 10 in FOMA terminal. By default,
“mopera.ne.jp” is set for cid1 and “mopera.net” for
cid3. For connecting to other providers or corporate
LANs, register the dialup connection (APN) for cid2, 4
to 10.
<cid> : Enter any number between 2, 4 to 10.
“PPP” : Enter “PPP”.
“APN” : Enter the dialup connection (APN) in
quotation marks.
AT + CGDCONT=
Reset all cids.
AT + CGDCONT=<cid>
Reset the specified cid
AT + CGDCONT?
･
For details
☛
P30
Dialup connection (APN) and
registration number (cid)
Next