Foma D902iS, Manual

Page: 384 / 517

382
Other Convenient
Fun
c
tions
■
Resetting the total calls duration:
a
Press
p
on Call Duration screen
z
Enter the terminal security code
b
1
to
4 z
Select Yes
･
To return to the call duration screen:
p
Checking the call cost
1 Press
m8441
･
If the total cost of calls was reset in the past,
the cost of the total calls made up to the
present after the reset is displayed.
■ Resetting the total call cost:
p
on
Call
Cost
screen
z
Enter PIN2 code
z
Select
Yes
INFORMATION
●
The fee for sending Chaku-moji is not included.
●
No last charge information appears as “
＊＊＊＊＊＊
YEN”.
●
When you switch from the voice call to the videophone
during a call, the last call cost shows the total amount of
them. During the operation to switch, no call cost is
required.
●
When the last or total duration of voice/videophone call
or data communication exceeds 9,999 hours 59 minutes
59 seconds, counting is restarted from 0 second.
●
When FOMA terminal is turned off, the last call duration
is stored, but the last call cost is displayed as “ ＊＊＊＊＊＊
YEN”.
●
The duration of receiving a call and ringing time cannot
be counted.
●
The call duration and call cost is not counted for i-mode
communication, packet communication, and PushTalk
communication. For details of those usage fees, see
“i-mode User’s Manual” you received when you
subscribed to i-mode.
Resetting the call cost automatically
Reset Call Cost
Total call cost is set to zero automatically on the
1st day of each month.
1
m8444
2 Enter the terminal security code
z 1
･
To cancel:
2
3 Enter the PIN2 code
INFORMATION
●
Even if the setting is ON , the setting is canceled when
the UIM different from the one used during the setting is
inserted and then turn the power on. It doesn’t return to
the previous setting even if the UIM used when setting it
is inserted again.
●
When the setting is
ON
, the call cost will be reset if you
change the date and time to the next month in Date and
Time Setting.
●
When the setting is ON , if the terminal is not turned on or
if you talking on the terminal at 0 o’clock of the first day of
the month, a reset will take place when you turn the
power on or end the call.
●
If the setting is ON , the PIN2 code is required when you
turn the power on.
Total videophone calls
：
The total duration of videophone calls made
Total data sessions
：
The total duration of data communication
established
Reset:day&time(Voice) ：
The last date and time when Total voice calls
was reset
Reset:day&time(VP)
：
The last date and time when Total
videophone calls was reset
Reset:day&time(Data) ：
The last date and time when Total data
sessions was reset
Last call cost: Voice ：
The cost of the last voice call
Last call cost: VP ：
The cost of the last videophone call
Last call cost: Data ：
The cost of the last data communication
Total calls cost ：
The total cost of voice/videophone call and
data communication
Reset: day & time
：
The last date and time when Total calls cost
was reset
Default OFF
Rese
t Ca
ll Cost