Foma D902iS, Manual

Page: 194 / 517

192
Ca
me
ra
･
A confirmation screen is displayed asking
whether to adjust the file size of the shot still
image depending on the settings of the image
size and size restrictions. Select
No limit
to
save the shot still image at the original size,
select
Msg attach:Small
to save the shot still
image in the file size smaller than 9,000 bytes
to FOMA terminal.
･
If the file size of the shot and saved image is
smaller than 9,000 bytes, a confirmation screen
is displayed asking whether to paste the shot
still image into the mail text. Select
Yes
to paste
it into the mail text, and select
No
to set to the
attached file.
･
Press
c
to return to the shooting screen
without composing i-mode Mail. To cancel
shooting, press
c
on the shooting screen.
4 Compose and send i-mode Mail
･
To return to the talking screen:
c
Using Bar Code Reader
Bar Code Reader
Data such as text and number contained in the
JAN code or QR code can be scanned using the
camera. The scanned data can be saved as the
phonebook or bookmark data. Also, the Phone To
(AV Phone To), Mail To and Web To functions are
available from the data.
･
You can save the scanned data up to 5 items.
･
Bar Code Reader can be used only with the out-
camera.
･
The bar codes and two-dimensional codes other
than JAN and QR codes cannot be scanned.
･
Some bar codes may not be scanned depending
on the types and sizes.
･
Scratches, dirt, damages, the low print quality, the
strong reflection of light or some QR code versions
may prevent the codes from being scanned.
･
You can activate Bar Code Reader on the
character entry screen and enter the scanned
data directly.
☛
P409
The JAN code is one of the bar codes indicating
numbers with the vertical lines (bars) of different
width. The bar codes of 8 digits (JAN8) or 13 digits
(JAN13) can be scanned.
The JAN code below shows the numeral data
“4942857124156”.
The QR code is one of the two-dimensional codes
indicating a string of alphanumeric and other
characters (kanji, kana and pictograms) or data such
as melody or image with the vertical and horizontal
patterns.
Activating Bar Code
Reader switches to Macro
automatically. Keep the
out-camera about 6 to 9
cm away from the code to
scan.
1
m61 z
Open the lens cover
･
During scanning the bar codes, the following
operations are enabled:
･
To set flicker adjustment:
m2 z 1
to
3
･
This setting is also reflected to the flicker
adjustment setting for the camera and
videophone.
･
For details of settings
☛
P191
JAN Code
QR Code
Scanning the code
a
：
Switches the compact light on ( )/off
(no icon).
#
： Switches between the normal mode (no
icon)/macro mode ( ).
･
Switch to the normal mode before
scanning the large size codes.
The left QR code shows the text
data “FOMA D902iS”.
6 to 9 cm
Approx.
Bar
C
ode Reader