Foma D902iS, Manual

Page: 385 / 517

383
O
ther Co
nve
n
ient Functio
n
s
Setting to notify the limit of call cost
Call Cost Limit
Set the maximum limit of call cost and, when the
total call cost exceeds the set amount, it is
notified with an alarm or icon.
･
The amount shown in Call Cost Limit is only an
estimate and should not be regarded as the
actual amount for billing.
1
m8442
2
Enter the terminal security code
z
Select
and set each item
3 Press
p
INFORMATION
●
If the call cost exceeds the maximum limit while talking or
during communication, is displayed at the top of the
display.
● When Sound + icon display is set for Alert method , the
alarm sounds and message informing that the call cost
exceeds the maximum limit is displayed on the standby
display after a call/communication. In the general silent
mode, a message appears but the alarm does not sound.
In the personalized silent mode, the alarm sounds
according to the ring alert volume set for Customize
Silent Mode. If the call cost exceeds the limit during a call
or communication at 00 o’clock the first day of the month
when Reset Call Cost is set to ON , neither the alarm
sounds nor the message.
●
The alarm sounds at the volume set for the call alert
volume.
●
If any key is pressed or other function is started while an
alarm is sounding, the alarm sound stops. If Key Lock is
temporarily canceled, closing FOMA terminal also stops
the alarm.
●
Even if the UIM is replaced after Call Cost Limit is set to
ON , the setting is stored.
Removing the icon of alert
Hide Call Cost Icon
1
m8443 z
Enter the
terminal security code
z
Select Yes
Using Calculator
Calculator
You can perform addition, subtraction,
multiplication and division ( ＋ , − , × , ÷ ) on your
FOMA terminal.
･
Up to 8 digits can be entered.
･
You can use Calculator from the entry fields for
schedules and notes, and paste the result of a
calculation into the entry field of the original
screen.
☛
P409
1
m74
2 Make a calculation
･
To delete the last digit entered:
a
･
To enter a decimal point:
(
･
To switch the displayed value between the
positive and negative:
#
3 Press
o
The calculation result is displayed.
･
Pressing
c
deletes the calculation result.
■ Copying the calculation result:
m1
･
To paste the copied value:
m2
･
Only one number can be saved. Copying a
new number overwrites the saved number.
The copied number is saved until FOMA
terminal is turned off.
Default Alert: OFF
Alert
：
Set whether to notify when the total call cost
exceeds the set amount.
･
If
OFF
is set, the items below cannot be
set.
Limit ：
Set the maximum amount of call cost (10 -
100,000 yen. 10 yen unit).
Alert method
：
Select the alarm with icon, or the icon only.
Alert sound
：
Select an alarm sound from the melody list
when
Sound + icon display is selected in Alert
method
.
･
Playing and checking a melody
☛
P129
Alert time ：
Specify how many seconds alarm sound
should ring (1 - 60 sec.). Available when
Sound + icon display is selected in Alert
method .
Calculate using the
dial keys (
0
to
9
) and
O
( ＋ , − ,
× , ÷ ).
Call Cost Limit
Next