Foma D902iS, Manual

Page: 88 / 517

86
Making/
Rec
e
ivi
ng Vid
e
op
hone Cal
ls
Setting images to be sent to the other party
You can change images and apply special effects to the image sent to the other party during a
videophone call. Also, you can switch between the in-camera and the out-camera.
Switching the outgoing image between your self image and the substitute image
1
Press
t
during a call
Setting the quality of outgoing and incoming images
･
Setting Prefer motion spd makes motions smoother in a little lower-definition image.
･
Setting Prefer img qual makes motions a little slower in a higher-definition image.
Setting the quality of outgoing image
1
m71
during a call
･
Pressing
&
during a call also switches the quality of outgoing image.
■
Setting the quality of incoming image:
m72
during a call
2
Press any of
1
to
3
Setting a frame on the outgoing image
Frame
The frame can be set while sending your self image.
･
Only the frame with the display size of 176 x 144 or smaller can be selected. As for downloaded frames,
only the frame with the display size of 176 x 144 can be selected.
1
m31
during a call
Default Normal
･
Each press switches the image between your self image ( ) and the
substitute image ( or ).
☛
P92
･
Even when Chara-den is set as the substitute image, Chara-den may not be
displayed. If this happens, the default image for the substitute image in Image
Setting is sent to the other party.
☛
P92
The substitute image
©BVIG
Example
Setting
im
age
s
t
o
be sent to the
othe
r party