Foma D902iS, Manual

Page: 73 / 517

71
Ma
ki
n
g
/R
ecei
vi
ng Cal
ls
2
Press any of
1
to
3
No Set Up
：
Displays the screen for the latest incoming call/communication without setting the priority.
Voice call ： Displays the voice call talking screen by priority.
Packet
： Displays the incoming packet communication screen by priority.
• When a voice call is received during i-mode packet communication, you can press
b
and
display the Switch Task menu to answer the call.
･
When there is incoming packet communication in i-mode, the voice call talking screen is displayed by
priority regardless of this setting.
The following screen is displayed depending on the setting for Priority Comm Mode:
When you can/could not answer a call
Putting incoming calls on hold when you cannot answer right away
Response and Hold
･
Callers are charged for the time spent on hold.
1
f
while receiving a call
2
Press
n
when you are ready to answer the call
･
For a voice call, you can answer the call also by opening FOMA terminal.
☛
P65
･
Press
t
or
n
for a videophone call. Press
a
to send the substitute image (
☛
P92) to the other
party.
･
If
f
is pressed or the other party hangs up during Response and Hold, the call is ended.
INFORMATION
●
When you use Voice Mail Service or Call Forwarding Service, you can switch to Voice Mail or Call Forwarding by
pressing
m
and selecting
Voice Mail
(
V-phone answerphone
for videophone call) or
Call Forwarding
while receiving a
call.
Screen display
Setting
Incoming packet communication (other than
i-mode) during voice call* 1, * 2
Incoming voice call during packet
communication* 3
No Set Up Voice call talking screen Incoming voice call screen
Voice call
Packet Incoming packet communication screen Screen displayed during i-mode communication
*1 The screen displayed for incoming calls depends on the setting for
Arrival call act
.
☛
P396
*2 Packet communication in modes other than i-mode does not include receiving of i-mode Mail, SMS and
Message R/F.
*3 Packet communication in modes other than i-mode cannot be received during i-mode communication.
☛
P439
Incoming voice
call on hold
Incoming videophone
call on hold
The incoming call is put on hold (Response and
Hold). The other party hears the response hold
guidance.
For videophone calls, the response hold image
is displayed on your and the other party’s
terminals.
Response and H
o
ld