Foma D902iS, Manual

Page: 195 / 517

193
Ca
m
e
ra
2
Scan the code
When you point the out-camera toward the code,
the code is scanned automatically. If scanned
correctly, a confirmation sound is played and the
scanned data is displayed.
･
When it is hard to scan the code, if you adjust
the distance, angle or direction of the code and
the out-camera, the code may be able to be
scanned.
･
If the data exceeds 11,000 one-byte or 5,500
two-byte characters, the exceeded characters
are not displayed, but can be saved.
･
When scanning is paused such as while a
submenu is displayed, the icon indicated at
the upper right of the screen changes to .
■ Re-scanning the code:
p
3 Press
m4
The scanned data is saved to FOMA terminal.
･
When 5 data has already saved or the memory
is not enough, a confirmation screen is
displayed asking whether to delete the saved
data. Select Yes to delete the saved data.
■
Copying the text data in the scanned data:
a
m1 z
Select the start position to
copy
･
To copy the entire text data:
mo
b
Select the end position to copy
When the data is divided into multiple parts (up to
16), scan them one by one according to messages
displayed on the screen.
･
Press
c
to cancel scanning on the way. Select
Yes
when a confirmation screen is displayed asking
whether to discard the scanned QR code data.
INFORMATION
●
If you press
m
on the still image shooting screen or
video recording screen and select Switch mode
→
Bar
code reader
, Bar Code Reader can be used as well.
●
When Call alert volume or Mail/Msg alert vol. is set to
silent
or Silent Mode or Public mode (Driving mode) is on,
the confirmation sound for scanning the bar code does
not sound.
●
Press
m4
on the bar code reading screen and press
1
or
2
to switch to Still Camera or Movie Camera.
When Bar Code Reader is started from other than the
character entry screen or i-
α
ppli, switching is not
available.
●
The scanned data is given a file name made up of the
scanned date and time + serial file .jan or .qr
(“.jan” is for JAN code and “.qr” for QR code). The file
name 20060710123400.jan, for example, means the
JAN code scanned at 12:34 on July 10, 2006. When
there are any previously saved data at the same date
and time, 1 is added to the serial file number. Note that
the date and time part of the file name appears as “-------
-----” if the date and time of FOMA terminal is not set. The
file name cannot be changed.
Using the scanned data
The available operations vary depending on the
scanned data.
Adding data to the phonebook
1
m61 z
Open the lens cover
2
p z
Select the scanned data
■
Deleting the scanned data: Highlight the
data
z m31 z
Select Yes
･
To delete all:
m32 z
Enter the
terminal security code
z
Select Yes
3
Highlight the data to add to the phonebook
z m31
(Add new data) or
m32
(Update)
z
Press
1
or
2
The registration screen for the phonebook is
displayed with the highlighted data entered.
･
To update saved entries, select the party to
add the data.
Scanning divided QR codes
Remaining number of QR
codes/total number of QR codes
State of scanning the QR code
Green: Last scanned code
Blue: Scanned codes
Gray: Remaining unscanned
codes
Example
Bar Co
de Reade
r
Next