Foma D902iS, Manual

Page: 277 / 517

275
i-
α
ppli
4
Press
p
･
When Set i- α ppli display is set to Yes , a
confirmation screen appears asking whether to
set i-
α
ppli as the standby display. Selecting Yes
sets the i-
α
ppli standby display.
INFORMATION
●
Even if Speed selector is set to OFF , some i-
α
ppli may not
invalidate the Speed Selector functions.
●
Even if Up and down or Right and left is set for Speed
Selector, rotating Speed Selector may cause a different
action or no action for some i-
α
ppli.
● Note that if you set No for Set NW transmission , i- α ppli
may not be started and timely information such as stock
prices or weather forecast may not be provided by
i-
α
ppli.
● If Yes is set for Use icons , information about icons for
unread mail, unread Message R/F, remaining battery
level, Silent Mode, and icons within service area/outside
service area may be sent to IPs through the Internet,
which may give the information to a third party. When Use
icons is set to No , i-
α
ppli that requires the icon
information may not operate.
●
If you rotate Speed Selector during i-
α
ppli operation, the
moving direction conforms to the setting of Direction of
Set speed selector . However, some i-
α
ppli may ignore the
setting of moving directions.
Setting the lighting and vibrator during i-
α
ppli
running
Display Light/Vibrate Effect
･
The i- α ppli standby display light operation
conforms to the setting of
Normal use
of
Display
light time
of Display Light Setting.
☛
P144
･
While Public mode (Driving mode) is on, the light
does not operate while i-
α
ppli is running even if
Software
is set.
･
This setting is also reflected to i- α ppli active of
Display light time
of Display Light Setting.
1
m324 z
Press
1
or
2
Allow the vibrator operation by i- α ppli.
･
While Public mode (Driving mode) is on, the
vibrator does not operate while i- α ppli is running
regardless of this setting.
･
This setting is also reflected to the vibrator setting
of
Alerts & Sounds
.
1
m325 z
Press
1
or
2
Starting another i-
α
ppli application from i-
α
ppli
You can start i- α ppli specified by some i- α ppli
applications, and enjoy it without returning to the
software list.
1 If a message appears indicating that the
specified i-
α
ppli will be started, press
o
INFORMATION
●
If the i-
α
ppli to start is not specified, select i-
α
ppli.
● When the i- α ppli does not exist in the software list even if
specified, it is necessary to download it.
Using pre-installed i-
α
ppli
The following i- α ppli applications are registered
by default:
Select each i-
α
ppli application from the list to start.
･
Some i-
α
ppli names may be different from those
on the display.
･
珍さん計画 DX おこづかい帖プラス and ｉアニ
メっちゃメーラー superDX500 can be set as the
i-
α
ppli standby display.
･
If you delete i-
α
ppli preloaded by default, you can
download it from i-mode site “My D-style”.
☛
P426
Setting display light
Default Terminal setting
Terminal setting
：
The setting of Normal use of Display light time
of the display light setting is assumed.
Software
：
The light comes on according to i-
α
ppli.
Setting vibrator
Default ON
･
珍さんの釣り物語 (Chin-san’s Fishing)
･
コラムスジュエル (Columns Jewel)
･
電子マネー「 Edy 」 (Electronic money “Edy”)
･
Ｇガイド番組表リモコン (G-GUIDE TV
Remote Controller)
･
ケータイクレジット「 iD （アイディ）」 (iD
credit payment service)
･
「 DCMX 」クレジットアプリ (DCMX Credit i-
α
ppli)
･
珍さん計画DXおこづかい帖プラス (Chin-san’s
Scheduled Cashbook)
･
ｉアニメっちゃメーラー superDX500
(i-anime Mailer superDX500)
･
便利！多機能電卓 (Useful! Multifunction
Calculator)
U
s
ing p
re-
in
sta
lled i
-
α
ppli