Foma D902iS, Manual

Page: 494 / 517

9
3
Set the dialup connection (APN)
By default, “mopera.ne.jp” is registered in cid1,
and “mopera.net” in cid3. Register a dialup
connection (APN) for cid 2 or 4 to 10.
a
Click
追加
(Add)
The
接続先
(APN)
の追加
(Add dialup
connection (APN)) screen appears.
b
In
接続先
(APN), correctly enter a dialup
connection name (APN) of your provider, etc.,
which supports the FOMA packet
communication
z
Click OK
The display returns to the
接続先
(APN)
設定
screen.
･
Only one-byte alphanumeric characters,
hyphens ( - ) and periods ( . ) can be entered
for
接続先
(APN) .
4
Click OK
The display returns to the screen in Step 2. 接続先
(APN)
set in Step 3 appears in 接続先
(APN)
の選択
(Select dialup connection (APN)).
5 Check the dialup connection name (APN) of
接続先
(APN)
の選択 and click 次へ
6 Enter the user name in ユーザー名 and the
password in
パスワード
z
Click
次へ
･
Enter the user name and password assigned
by the provider, etc. correctly. Be careful about
the upper/lower case of each character.
･
For Windows XP or 2000, select the allowable
user. If you select
すべてのユーザー , all users
that are allowed to logon to Windows can
access the connection. For Windows Me or 98,
使用可能ユーザーの選択
is not displayed.
7 Check that
最適化を行う
is selected and
click 次へ
･
This screen does not appear if optimization has
already been performed.
8 Check the settings and click 完了
9 Click
OK
The PC must be rebooted for the changes to take
effect. Click はい when a window prompts you to
reboot the PC.
･
If optimization of W-TCP setting has already
been performed, rebooting is not required.
･
Performing communication
☛
P11
▼