Foma D902iS, Manual, Page: 493 / 517

8
6
Click
次へ
･
The entry for
ユーザー名
(User name) or
パスワード (Password) is not required.
･
For Windows XP or 2000, select the allowable
user. If you select
すべてのユーザー
(All
users), all users that are allowed to logon to
Windows can access the connection. For
Windows Me or 98,
使用可能ユーザーの選択
(Select allowable user) is not displayed.
7 Check that 最適化を行う (Optimize) is
selected and click 次へ
･
This screen is not displayed if optimization has
already been performed.
8
Check the settings and click
完了
9
Click
OK
The PC must be rebooted for the changes to take
effect. Click
はい
when a window prompts you to
reboot the PC.
･
If optimization of W-TCP setting has already
been performed, rebooting is not required.
･
Performing communication
☛
P11
･
Using mopera U / mopera
☛
P7
For Windows XP
1 Perform Steps 1 to 4 of “Using mopera U /
mopera” of “Setting packet
communication by easy setup”
☛
P7
･
Select
その他
(Others) in Step 3 for the dialup
connection.
2 Enter any connection name
z
Click 接続
先
(APN)
設定
(Set dialup connection
(APN))
･
The following characters (one-byte) cannot be
entered:
￥ / : ＊ ? ! <> ｜
■
Advanced setting (TCP/IP setting):
Click 詳細情報の設定 (Set detail info) to
display the IP
アドレス
(IP address) and
ネー
ムサーバー
(Name server) setting screens.
When dialup information is required, register
such as addresses, based on the information
assigned by the provider,etc.
Using other providers
Example
Next