Foma D902iS, Manual

Page: 89 / 517

87
Making/
Re
ceivi
ng Vid
e
op
hone Cal
ls
2
Select a frame
Applying special effects to outgoing image
Scene Mode/Effect
You can apply the following effects to outgoing images. These settings can be changed only while sending your
self image.
･
For details
☛
P187
1
m21
during a call
2
Press any of
1
to
9
,
0
,
(
or
#
Adjusting the brightness/color density/flicker of outgoing image
Camera Setting
You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of
images, if it occurs, by making settings according to the power supply frequency in your area.
･
This setting can be changed only while your self image is being sent.
･
The brightness and color density may not be changed depending on the setting for Screen Mode/Effect.
･
This setting is retained even after the call is finished.
･
The flicker adjustment settings for Camera and Bar Code Reader will reflect changes in this setting.
Item Icon Item Icon Item Icon Item Icon
Full auto Night Letter Soft touch
Sensitivity up Twilight Color reversal Mono tone (red)
Super sensitivity up Surf&Snow Painting Mono tone (green)
Adjust backlight Sport Woodcut Mono tone (blue)
Spot photometry Pet Whiten Monochrome
Scenery Gourmet Suntan Sepia
Default Full auto
Default Brightness: level 3 Density: level 3 Flicker adjustment: Auto
･
While the in-camera is used, the mirror image (left-right reversed image) is
displayed on the screen and the normal image (right directed image) is sent to
the other party. While the out-camera is used, the same image as displayed on
the screen is sent to the other party.
･
To cancel sending the frame:
o
while sending a frame
･
Frames set by default
☛
P424
･
Press
&
to switch the pages.
The effect currently applied
Setting
im
age
s
t
o
be sent to the
othe
r party
Next