Foma D902iS, Manual

Page: 286 / 517

284
i-
α
ppl
i
●
If the specified i-
α
ppli is set not to start with i-
α
ppli To, a
message is displayed and i-
α
ppli is not started.
☛
P274
Operating the i-
α
ppli standby display
i-
α
ppli Standby Display
When i-
α
ppli is set for the standby display, you
can start i-
α
ppli from the standby display to
operate. On the i-
α
ppli standby display or
is indicated at the top of the screen.
･
It is necessary to set i-
α
ppli for the standby
display beforehand.
☛
P139
INFORMATION
●
When you set i-
α
ppli that performs communication, it
may not operate correctly depending on radio wave
conditions, etc.
●
While All Lock, PIM Lock, Privacy Mode (i-
α
ppli is set to
Authorized access
) or Omakase Lock (Remote Lock) is
active, the i-
α
ppli standby display will be canceled
temporarily. If you cancel All Lock, PIM Lock, or Privacy
Mode, the i-
α
ppli standby display restarts.
●
If the use of i-
α
ppli set to the i-
α
ppli standby display is
stopped by IP, the i-
α
ppli standby display is canceled.
●
While the i-
α
ppli standby display is activated, if an error
that makes it difficult to continue the i-
α
ppli standby
display occurs, a confirmation screen appears asking
whether you will cancel or not. When you select Yes , the
i-
α
ppli standby display setting is canceled. At this time,
the name of i-
α
ppli and end date/time are recorded in
Abnormal Exit History.
●
You cannot connect to a site (Web To) from the i-
α
ppli
standby display.
●
When FOMA terminal is turned on with the i-
α
ppli
standby display set, a confirmation screen is displayed
asking whether to start the i-
α
ppli standby display. When
you select
Yes
, the i-
α
ppli standby display starts. When
you select No , the i-
α
ppli standby display setting is
canceled. If you operate nothing within 5 seconds after
the confirmation screen appeared, the i-
α
ppli standby
display starts automatically. When the power is turned on
by Auto Power ON, the i-
α
ppli standby display
automatically starts, without displaying the confirmation
screen.
Starting i-
α
ppli of the i-
α
ppli standby display
1
Press
c
in the i-
α
ppli standby display
The screen is changed to the i-
α
ppli screen and
or blinks at the top of the display.
Quitting i-
α
ppli to return to the i-
α
ppli standby
display
1
f
while i-
α
ppli is running
z
Select
End
i-
α
ppli is ended and the i-
α
ppli standby display is
activated. The icon at the top of the display
switches from to , or from to .
･
The procedure to quit i-
α
ppli and return to the
i-
α
ppli standby display depends on the type of
i- α ppli.
c
makes some types of i- α ppli
return.
･
Even if
End
is selected, the i-
α
ppli standby
display setting is not canceled. To cancel,
select Cancel . and at the top of the
display disappear.
INFORMATION
●
You can also cancel i-
α
ppli by highlighting i-
α
ppli of the
i-
α
ppli standby display in the software list, pressing
m
,
selecting i-
α
ppli display and then selecting Cancel .
Displaying the exit history of i-
α
ppli standby
display
Abnormal Exit History
When an error that makes it difficult to continue the
i- α ppli standby display occurs, the name of i- α ppli,
date and time are recorded.
･
Up to 20 abnormal exits are recorded. When
there are more than 20 abnormal exits, the 21st
exit is written over the oldest one.
･
In the normal end, exits are not registered.
1 Press
m332
■ Deleting the history:
p z
Select
Yes
Managing i-
α
ppli
Upgrading i-
α
ppli
Upgrade
When i-
α
ppli has been updated, it can be upgraded.
･
i-
α
ppli whose usage is stopped by IP cannot be
upgraded.
1
d
(for over a second)
z
Select a folder
2 Highlight i-
α
ppli
z m5 z
Select
Yes
･
When upgrade is unnecessary, the message
that i- α ppli is the newest is displayed.
i-
α
ppli
Sta
n
dby Displ
a
y
Note: The miniSD memory card is not included in the bundle and needs to be purchased.
☛
P331