Foma D902iS, Manual

Page: 95 / 517

93
Making/
Re
ceivi
ng Vid
e
op
hone Cal
ls
Setting of switching between a voice call and videophone call
Notify Switchable Mode
Set whether to notify the other party’s terminal that your terminal can switch between a voice call and a
videophone call.
･
You cannot change the setting during a voice call or videophone call.
･
This setting cannot be made outside the service area. Operate the terminal in locations with good radio
wave condition.
1
m87171
■
Deactivating:
m87172
■
Checking the current setting:
m87173
2
Select
Yes
Setting how incoming videophone calls are handled during i-mode
Data Session Arrival Act
Videophone calls can be received during i-mode packet communication.
1
m8714
2
Press any of
1
to
4
*1 The service is not available as of May 2006.
INFORMATION
● Voice Mail Service and Call Forwarding Service are optional subscriber services. Without subscription, even if you set
V.phone answerphone or Call forwarding , the action of Packet DL priority takes place.
● If Voice Mail Service or Call Forwarding Service is activated and the ringing time for each service is set to 0 second,
either service starts its operation, regardless of this setting. Incoming calls are not registered in the received call history.
Default Indication ON: active
Default V.phone priority
V.phone priority
：
Receives a videophone call. When the call is answered, the current packet
communication is disconnected.
Packet DL priority
：
Rejects an incoming videophone call and continues the packet communication.
V.phone answerphone ： Connects an incoming videophone call to the Voice Mail Service Center.*
1
Call forwarding
：
Forwards an incoming videophone call to the forwarding phone number.
Noti
fy Sw
itc
h
able Mode