Foma D902iS, Manual

Page: 166 / 517

164
S
a
fet
y
S
e
tti
ngs
Preventing key errors
Key Lock
Disables the key operations and prevent wrong operations while you carry the terminal around by
putting it into the bag, etc.
･
Key Lock can be set/canceled even when the screen other than the standby display is displayed. However,
it cannot be set after turning on the power until the standby display appears.
1
Slide down the keylock switch and then take off your finger
When FOMA terminal is closed or Key Lock Setting is set to Lock even slide open ,
Key Lock is set, and the standby display disappears.
･
The screen is still displayed and is indicated on the upper part of the display
when Normal use of Display light time is set to Always in Display Light Setting, when
the shooting/recording screen of Camera/Movie Camera is displayed or during the
shooting, when charging the battery in case AC adapter connected of Display light
time is set to Always , when executing functions in which Display light time is set to Always , etc.
･
During a call or PushTalk call, Key Lock is set in the state of temporary release and (in gray) is
indicated on the upper part of the display. When a call or PushTalk call is ended, Key Lock is set.
･
When Key Lock Setting is set to OFF when slide open , if you set Key Lock while FOMA terminal is opened,
Key Lock is set in the state of temporary release and (in gray) is indicated on the upper part of the
display. When FOMA terminal is closed, Key Lock is set.
■
Canceling: Slide down the keylock switch and then take off your finger
Key Lock is canceled, and the display lights.
Setting the operation of Key Lock when opening FOMA terminal
Key Lock Setting
Set whether to release Key Lock temporarily when opening FOMA terminal
1
m838 z
Press
1
or
2
INFORMATION
●
When Key Lock is released temporarily while setting OFF when slide open , if you change the setting to Lock even slide
open
, Key Lock is set. Closing FOMA terminal or pressing any key turns off the display.
●
When the power is turned off by Auto Power OFF while Key Lock is on or is released temporarily, Key Lock is canceled.
It is also the same as when the power is manually turned off during temporary release.
●
Even while Key Lock is on, the following key operations can be performed:
･
When there is a voice call, receiving the call by
n
or opening FOMA terminal (only when Open Answer is set to
ON ), putting the call on hold by
f
, handling the call by Answer Machine by holding down
C
for over a second
and stopping the ring alert by
C
.
･
When there is a videophone call, receiving the call by
n
or
t
, putting the call on hold by
f
, handling the call
by Answer Machine by holding down
C
for over a second and stopping the ring alert by
C
･
When there is a PushTalk call, answering the call by
g
or
n
, or notifying of Disconnected by
f
and stopping the
ring alert by
C
.
･
Stopping the alarm sound, etc.
･
Hold down a switch of the equipment such as a flat type earphone/microphone set with switch (optional) for over a
second to make a voice call or receive a voice/videophone call.
･
Operating Music Prayer by using a switch of the equipment such as a flat type stereo earphone set (optional)
If an incoming call is received or the call is handled by Response and Hold or Answer Machine, Key Lock is released
temporarily and the key operations can be performed. If the call is ended, Key Lock is set again.
●
When the display disappears while Key Lock is on, pressing
f
or opening FOMA terminal lights the display. or
(in gray) is indicated on the upper part of the display.
Default not set
Default OFF when slide open
Keylock switch
Ke
y Lock