Exinda EXNV-10063, Administration Manual

Page: 471 / 623

Exinda Network Orchestrator 4 Settings | 471
Exinda Communities: adding, editing, and removing appliances
Use the following sets of instructions to edit the listing of Exinda community members. For appliances with firmware
versions v6.4.0 or later, you do not need to manage communities unless you want such an appliance to join a community
created for a pre-6.4.0 appliance group.
NOTE
An Exinda appliance can belong to multiple community groups. By default, all appliances belong to the community
group with Group ID 0. As a security measure, the
Community Group ID
can be used like a PIN to restrict access to
any other Exinda appliance from joining your community.
Manually adding an Exinda appliance to the community
1. Go to Configuration > System > Optimization > Community .
2.
In the
Manually Add New Community Node
area, type a
Name
and the
IP Address
for the Exinda appliance.
3. Click Apply Changes .
The appliance is added to the list of manually added community nodes.
Editing manually added communities
1.
Go to
Configuration > System > Optimization > Community
.
2. On the Manually Added Community Nodes panel, for the particular appliance, click Edit .
Screenshot 186: The edit screen opens.