Exinda EXNV-10063, Administration Manual

Page: 142 / 623

Exinda Network Orchestrator 3 Using | 142
Active Directory Dynamic Network Objects - When Active Directory users or groups are defined, a corresponding
dynamic network object is automatically created. This dynamic network object is populated by the hosts that make up
that particular Active Directory user or group. For further information, see the
Integrate with Active Directory and Users
and Groups
.
Screenshot 41: Select the desired dynamic network object to show the IP addresses/User
Screenshot 42: Select a configured adaptive response network object or a user network object or user group network object
To view it, go to
Configuration > Objects > Users & Groups
.
3.1.3 Working with users and groups as objects
Users and groups objects are used to define pre-populated users and groups such that they can be used for monitoring
and optimization.
There are two ways the Exinda Appliance can learn about user and group information:
1. Active Directory
: The Exinda Appliance can receive user and group information using the Exinda Active Directory Ser-
vice, installed on Active Directory Servers.
2. Static Users and Groups: Static users and group information can be only entered using the CLI "networkuser" com-
mand.