Enterasys SECURESTACK C3, Configuration Manual

Page: 176 / 872

set port disable
7-8 Port Configuration
set port disable
Use this command to administratively disable one or more ports. When this command is
executed, in addition to disabling the physical Ethernet link, the port will no longer learn entries
in the forwarding database.
Syntax
set port disable port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to disable ge.1.1:
C3(su)->set port disable
ge.
1.1
set port enable
Use this command to administratively enable one or more ports.
Syntax
set port enable port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to enable ge.1.3:
C3(su)->set port enable
ge.
1.3
port ‐ string Specifies the port(s) to disable. For a detailed description of possible port ‐
string values, refer to “ Port String Syntax Used in the CLI ” on page 7 ‐ 1.
port ‐ string Specifies the port(s) to enable. For a detailed description of possible port ‐
string values, refer to “ Port String Syntax Used in the CLI ” on page 7 ‐ 1.