Enterasys SECURESTACK C3, Configuration Manual

Page: 836 / 872

Configuration show tacacs
27-2
show tacacs
Use this command to display the current configuration information and status.
Syntax
show tacacs [ state ]
Parameters
Defaults
If state is not specified, all configuration information will be displayed.
Mode
Switch command, Read ‐ Only.
Example
This example shows how to display all TACACS configuration information.
C3(ro)->show tacacs
status:Disabled
session accounting state:disable
command authorization state:disable
command auccounting state:disable
single connect state:Disabled
service: exec
session authorization A-V pairs:
access-level attribute value
read-only priv-lvl 0
read-write priv-lvl 1
super-user priv-lvl 15
Server IP address Port Timeout
-------------- ---------- ------ -------
1 192.168.10.1 49 10
Table 27 ‐ 1 provides an explanation of the command output.
state (Optional) Displays only the client status.
Table 27-1 show tacacs Output Details
Output... What it displays...
status Whether the client is enabled or disabled .
session accounting
state Whether session accounting is enabled or disabled .
command
authorization state Whether command authorization is enabled or disabled .
command accounting
state Whether command accounting is enabled or disabled .