Enterasys SECURESTACK C3, Configuration Manual, Page: 92 / 872

show logout
3-30 Basic Configuration
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the terminal length to 50:
C3(su)->set length 50
show logout
Use this command to display the time (in seconds) an idle console or Telnet CLI session will
remain connected before timing out.
Syntax
show logout
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ only.
Example
This example shows how to display the CLI logout setting:
C3(su)->show logout
Logout currently set to: 10 minutes.
set logout
Use this command to set the time (in minutes) an idle console or Telnet CLI session will remain
connected before timing out.
Syntax
set logout timeout
Parameters
Defaults
None.
timeout Sets the number of minutes the system will remain idle before timing out.