Enterasys SECURESTACK C3, Configuration Manual, Page: 240 / 872

set snmp group
8-12 SNMP Configuration
Mode
Switch command, read ‐ only.
Example
This example shows how to display SNMP group information:
C3(su)->show snmp group
--- SNMP group information ---
Security model = SNMPv1
Security/user name = public
Group name = Anyone
Storage type = nonVolatile
Row status = active
Security model = SNMPv1
Security/user name = public.router1
Group name = Anyone
Storage type = nonVolatile
Row status = active
Table 8 ‐ 5 provides an explanation of the command output.
set snmp group
Use this command to create an SNMP group. This associates SNMPv3 users to a group that shares
common access privileges.
Syntax
set snmp group groupname user user security-model { v1 | v2c | usm } [ volatile |
nonvolatile ]
Parameters
Defaults
If storage type is not specified, nonvolatile storage will be applied.
Table 8-5 show snmp group Output Details
Output Field What It Displays...
Security model SNMP version associated with this group.
Security/user name User belonging to the SNMP group.
Group name Name of SNMP group.
Storage type Whether entry is stored in volatile , nonvolatile or read-only memory.
Row status Status of this entry: active , notInService, or notReady .
groupname Specifies an SNMP group name to create.
user user Specifies an SNMPv3 user name to assign to the group.
security ‐ model v1 |
v2c | usm
Specifies an SNMP security model to assign to the group.
volatile |
nonvolatile
(Optional) Specifies a storage type for SNMP entries associated with the
group.