Enterasys SECURESTACK C3, Configuration Manual

Page: 394 / 872

set port txq
12-8 Port Priority Configuration
Example
This example shows how to display the current algorithm and transmit queue weights configured
on port ge.1.10:
C3(su)->show port txq
ge.
1.10
Port Alg Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
----- --- --- --- --- --- --- --- --- ---
ge.
1.10 WRR 10 10 15 20 25 20 0 0
set port txq
Use this command to set QoS transmit queue arbitration values for physical ports.
Syntax
set port txq port-string value0 value1 value2 value3 value4 value5 value6 value7
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
Queues can be set for strict priority (SP) or weighted round ‐ robin (WRR). If set for WRR mode,
weights may be assigned to those queues with this command. Weights are specified in the range of
0 to 100 percent. Weights specified for queues 0 through 7 on any port must total 100 percent.
Examples
This example shows how to change the arbitration values for the eight transmit queues belonging
to ge.1.1:
C3(su)->set port txq
ge.
1.1 10 10 10 10 10 10 10 30
This example shows how to change the algorithm to strict priority for the eight transmit queues
belonging to ge.1.1:
C3(su)->set port txq
ge.
1.1 0 0 0 0 0 O O 100
C3(su)->show port txq
ge.
1.1
Port Alg Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
----- --- --- --- --- --- --- --- --- ---
ge.
1.1 STR SP SP SP SP SP SP SP SP
port ‐ string Specifies port(s) on which to set queue arbitration values. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 7 ‐ 1.
Only physical ports can be configured with this command. LAG ports
cannot be configured.
value0 ‐ value7 Specifies percentage to allocate to a specific transmit queue. The values
must total 100 percent.