Enterasys SECURESTACK C3, Configuration Manual

Page: 775 / 872

clear macauthentication password
SecureStack C3 Configuration Guide 26-29
Example
This example shows how to set the MAC authentication password to “macauth”:
C3(su)->set macauthentication password macauth
clear macauthentication password
Use this command to clear the MAC authentication password.
Syntax
clear macauthentication password
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to clear the MAC authentication password:
C3(su)->clear macauthentication password
set macauthentication port
Use this command to enable or disable one or more ports for MAC authentication.
Syntax
set macauthentication port { enable | disable } port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
enable | disable Enables or disables MAC authentication.
port ‐ string Specifies port(s) on which to enable or disable MAC authentication. For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 7 ‐ 1.