Enterasys SECURESTACK C3, Configuration Manual

Page: 431 / 872

disconnect
SecureStack C3 Configuration Guide 14-17
C3(su)->show users
Session User Location
-------- ----- --------------------------
* telnet rw 134.141.192.119
telnet rw 134.141.192.18
disconnect
Use this command to close an active console port or Telnet session from the switch CLI.
Syntax
disconnect { ip-addr | console }
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Examples
This example shows how to close a Telnet session to host 134.141.192.119:
C3(su)->disconnect 134.141.192.119
This example shows how to close the current console session:
C3(su)->disconnect console
show netstat
Use this command to display network layer statistics.
Syntax
show netstat
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ write.
ip ‐ addr Specifies the IP address of the Telnet session to be disconnected. This
address is displayed in the output shown in “ show users ” on page 12 ‐ 15.
console Closes an active console port.