Enterasys SECURESTACK C3, Configuration Manual

Page: 365 / 872

Assigning Ports to Policy Profiles
SecureStack C3 Configuration Guide 11-15
Assigning Ports to Policy Profiles
Purpose
To assign and unassign ports to policy profiles.
Commands
set policy port
Use this command to assign ports to a policy profile.
Syntax
set policy port port-string profile-index
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to allow Gigabit Ethernet ports 5 through 15 in slot 1 to transmit frames
according to policy profile 1:
C3(su)->set policy port ge.1.5-15 1
Note: Refer to Appendix A , Policy and Authentication Capacities for information about policy
limits for this platform.
For information about... Refer to page...
set policy port 11-15
clear policy port 11-16
port ‐ string Specifies the port(s) to add to the policy profile. For a detailed description
of possible port ‐ string values, refer to “ Port String Syntax Used in the CLI ”
on page 7 ‐ 1.
profile ‐ index Specifies the ID of the policy profile (role) to which the port(s) will be
added. This value must match the profile ‐ index value assigned using the
set policy profile command (“ set policy profile ” on page 11 ‐ 4) in order
for a policy profile to be active on the specified port.