Enterasys SECURESTACK C3, Configuration Manual, Page: 514 / 872

DHCP Snooping Commands
17-4 DHCP Snooping and Dynamic ARP Inspection
DHCP Snooping Commands
set dhcpsnooping
Use this command to enable or disable DHCP snooping globally.
Syntax
set dhcpsnooping { enable | disable }
Parameters
Defaults
Disabled globally.
Mode
Switch command, read ‐ write.
Usage
By default, DHCP snooping is disabled globally and on all VLANs. You must enable it globally
with this command, and then enable it on specific VLANs.
For information about... Refer to page...
set dhcpsnooping 17-4
set dhcpsnooping vlan 17-5
set dhcpsnooping database write-delay 17-5
set dhcpsnooping trust 17-6
set dhcpsnooping binding 17-7
set dhcpsnooping verify 17-7
set dhcpsnooping log-invalid 17-8
set dhcpsnooping limit 17-9
show dhcpsnooping 17-10
show dhcpsnooping database 17-11
show dhcpsnooping port 17-11
show dhcpsnooping binding 17-12
show dhcpsnooping statistics 17-13
clear dhcpsnooping binding 17-14
clear dhcpsnooping statistics 17-14
clear dhcpsnooping database 17-14
clear dhcpsnooping limit 17-15
enable Enable DHCP snooping globally on the switch.
disable Disable DHCP snooping globally on the switch.