Enterasys SECURESTACK C3, Configuration Manual

Page: 710 / 872

area nssa default-info-originate
25-12 OSPFv3 Configuration
area nssa default-info-originate
This command configures the metric value and type for the default route advertised into the
NSSA.
Syntax
area areaid nssa default-info-originate [ metric ] [ comparable | non-comparable ]
no area areaid nssa default-info-originate
Parameters
Defaults
Default metric value is 10.
Mode
Router OSPFv3 configuration: C3
(su)->router(Config-router)#
Usage
Use this command to allow a default route to be advertised within the area. This option should be
configured only on area border routers (ABRs).
Use the no form of this command to prevent a default route to be advertised within the area.
Example
This example configures NSSA area 20 to advertise a default route.
C3(su)->router(Config-router)# area 20 nssa default-info-originate
area nssa no-redistribute
This command configures the NSSA area border router to not redistribute learned external routes
to the NSSA.
Syntax
area areaid no-redistribute
no area areaid no-redistribute
Parameters
areaid Specifies the area ID in IP address format (dotted ‐ quad) or as a decimal
value.
metric (Optional) Specifies the metric of the default route, in the range of 1 to
16777214.
comparable |
non ‐ comparable
(Optional) Specifies the metric type:
• comparable — nssa ‐ external 1
• non ‐ comparable — nssa ‐ external 2
areaid Specifies the area ID in IP address format (dotted ‐ quad) or as a decimal
value.