Enterasys SECURESTACK C3, Configuration Manual

Page: 225 / 872

show port protected
SecureStack C3 Configuration Guide 7-57
Example
This example shows how to assign ports ge.1.1 through ge.1.3 to protected port group 1:
C3(rw)->set port protected ge.1.1-3 1
show port protected
Use this command to display information about the ports configured for protected mode.
Syntax
show port protected [ port-string ] | [ group-id ]
Parameters
Defaults
If no parameters are entered, information about all protected ports is displayed.
Mode
Read ‐ only.
Example
This example shows how to display information about all protected ports:
C3(ro)->show port protected
Group id Port
----------------------
1 ge.1.1
1 ge.1.2
1 ge.1.3
clear port protected
Use this command to remove a port or group from protected mode.
Syntax
clear port protected [ port-string ] | [ group-id ]
Parameters
Defaults
If no parameters are entered, all protected ports and groups are cleared.
port ‐ string (Optional) Specifies the port or ports for which to display information.
group ‐ id (Optional) Specifies the id of the group for which to display information.
Id can range from 0 to 2.
port ‐ string (Optional) Specifies the port or ports to remove from protected mode.
group ‐ id (Optional) Specifies the id of the group to remove from protected mode.
Id can range from 0 to 2.