Enterasys SECURESTACK C3, Configuration Manual, Page: 310 / 872

set spantree adminedge
9-40 Spanning Tree Configuration
Mode
Switch command, read ‐ only.
Example
This example shows how to display the edge port status for ge.3.2:
C3(su)->show spantree adminedge port
ge.
3.2
Port
ge.
3.2 has a Port Admin Edge of Edge-Port
set spantree adminedge
Use this command to set the edge port administrative status on a Spanning Tree port.
Syntax
set spantree adminedge port-string {true | false}
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
The default behavior of the edge port administrative status begins with the value set to false
initially after the device is powered up. If a Spanning Tree BDPU is not received on the port within
a few seconds, the status setting changes to true .
Example
This example shows how to set ge.1.11 as an edge port:
C3(su)->set spantree adminedge
ge.
1.11 true
clear spantree adminedge
Use this command to reset a Spanning Tree port to non ‐ edge status.
Syntax
clear spantree adminedge port-string
port ‐ string Specifies the edge port. For a detailed description of possible port ‐ string
values, refer to “ Port String Syntax Used in the CLI ” on page 7 ‐ 1.
true | false Enables ( true ) or disables ( false ) the specified port as a Spanning Tree edge
port.