Enterasys SECURESTACK C3, Configuration Manual

Page: 507 / 872

set dhcp pool netbios-node-type
SecureStack C3 Configuration Guide 16-27
Mode
Switch command, read ‐ write.
Example
This example removes the NetBIOS name server list from the address pool auto1.
C3(rw)->clear dhcp pool auto1 netbios-name-server
set dhcp pool netbios-node-type
Use this command to specify a NetBIOS node (server) type for the DHCP clients served by the
address pool being configured.
Syntax
set dhcp pool poolname netbios-node-type { b-node | h-node | p-node | m-node }
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example specifies hybrid as the NetBIOS node type for the address pool “auto1.”
C3(rw)->set dhcp pool auto1 netbios-node-type h-node
clear dhcp pool netbios-node-type
Use this command to remove the NetBIOS node type from the address pool being configured.
Syntax
clear dhcp pool poolname netbios-node-type
Parameters
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.
b ‐ node Specifies the NetBIOs node type to be broadcast (no WINS).
h ‐ node Specifies the NetBIOs node type to be hybrid (WINS, then broadcast).
p ‐ node Specifies the NetBIOs node type to be peer (WINS only).
m ‐ node Specifies the NetBIOs node type to be mixed (broadcast, then WINS).
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.