Enterasys SECURESTACK C3, Configuration Manual, Page: 60 / 872

set switch copy-fw
2-10 Configuring Switches in a Stack
Examples
This example shows how to assign priority 3 to switch 5:
C3(su)->set switch 5 priority 3
This example shows how to renumber switch 5 to switch 7:
C3(su)-> s et switch 5 renumber 7
set switch copy-fw
Use this command to replicate the code image file from the management switch to other
switch(es) in the stack.
Syntax
set switch copy-fw [ destination-system unit ]
Parameters
Defaults
If destination ‐ system is not specified, the management image file will be replicated to all switches
in the stack.
Mode
Switch command, read ‐ write.
Example
This example shows how to replicate the management image file to all switches in the stack:
C3(su)->set switch copy-fw
Are you sure you want to copy firmware? (y/n) y
Code transfer completed successfully.
set switch description
Use this command to assign a name to a switch in the stack.
Syntax
set switch description unit description
Parameters
Defaults
None.
destination ‐ system
unit
(Optional) Specifies the unit number of unit on which to copy the
management image file.
unit Specifies a unit number for the switch.
description Specifies a text description for the unit.