Enterasys SECURESTACK C3, Configuration Manual

Page: 741 / 872

show ipv6 ospf neighbor
SecureStack C3 Configuration Guide 25-43
This example displays the output of this command when a neighbor is specified.
C3(su)->router#show ipv6 ospf neighbor 8.8.8.8
Interface Vlan 45
Area Id 0.0.0.30
Options 0x2
Router Priority 128
Dead timer due in (secs) 33
State Full/DR
Events 6
Retransmission Queue Length 0
Table 25 ‐ 10 provides an explanation of the command output.
Table 25-9 show ipv6 ospf neighbor Output Details
Output Field What It Displays...
Router ID The 4-digit dotted-decimal number of the neighbor router.
Priority OSPFv3 priority for the specified interface. The priority of an
interface is a priority integer from 0 to 255. A value of '0' indicates
that the router is not eligible to become the designated router on
this network.
Intf ID Interface ID of the neighbor.
Interface Interface of the local router.
State State of the neighboring routers. Possible values are:
• Down- initial state of the neighbor conversation - no recent
information has been received from the neighbor.
• Attempt - no recent information has been received from the
neighbor but a more concerted effort should be made to
contact the neighbor.
• Init - a Hello packet has recently been seen from the neighbor,
but bidirectional communication has not yet been established.
• 2 way - communication between the two routers is bidirectional.
This is the final state between two routers, both of which are
non-designated routers or back-up designated routers.
• Exchange start - the first step in creating an adjacency between
the two neighboring routers, the goal is to decide which router
is the master and to decide upon the initial DD sequence
number.
• Exchange - the router is describing its entire link state database
by sending Database Description packets to the neighbor.
• Loading - Link State Request packets are sent to the neighbor
asking for the more recent LSAs that have been discovered
(but not yet received) in the Exchange state.
• Full - the neighboring routers are fully adjacent and they will
now appear in router-LSAs and network-LSAs.
Dead Time Amount of time, in seconds, to wait before the router assumes the
neighbor is unreachable.