Enterasys SECURESTACK C3, Configuration Manual, Page: 112 / 872

exit
3-50 Basic Configuration
exit
Use either of these commands to leave a CLI session.
Syntax
exit
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ only.
Usage
By default, switch timeout occurs after 15 minutes of user inactivity, automatically closing your
CLI session. Use the set logout command ( page 3 ‐ 30 ) to change this default.
Example
This example shows how to exit a CLI session:
C3(su)->exit
Resetting the Switch
Purpose
To reset one or more switches, and to clear the user ‐ defined configuration parameters.
Commands
reset
Use this command to reset the switch without losing any user ‐ defined configuration settings.
Syntax
reset [ unit ]
Parameters
For information about... Refer to page...
reset 3-50
clear config 3-51
unit (Optional) Specifies a unit to be reset.