Enterasys SECURESTACK C3, Configuration Manual, Page: 177 / 872

show port alias
SecureStack C3 Configuration Guide 7-9
show port alias
Use this command to display the alias name for one or more ports.
Syntax
show port alias [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read ‐ only.
Example
This example shows how to display alias information for ports 1 ‐ 3 on slot 3:
C3(rw)->show port alias ge.3.1-3
Port ge.3.1 user
Port ge.3.2 user
Port ge.3.3 Admin
set port alias
Use this command to assign an alias name to a port.
Syntax
set port alias port-string [ name ]
Parameters
Defaults
If name is not specified, the alias assigned to the port will be cleared.
Mode
Switch command, read ‐ write.
port ‐ string (Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 7 ‐ 1.
port ‐ string Specifies the port to which an alias will be assigned. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 7 ‐ 1.
name (Optional) Assigns an alias name to the port. If the alias name contains
spaces, the text string must be surrounded by double quotes. Maximum
length is 60 characters.