Enterasys SECURESTACK C3, Configuration Manual, Page: 840 / 872

Configuration show tacacs session
27-6
Examples
This example removes server 1.
C3(rw)->clear tacacs server 1
This example resets the timeout value to its default value of 10 seconds for all configured
servers.
C3(rw)->clear tacacs server all timeout
show tacacs session
Use this command to display the current client session settings.
Syntax
show tacacs session { authorization | accounting }
Parameters
Defaults
None.
Mode
Switch command, Read ‐ Only.
Examples
This example shows how to display client session authorization information:
C3(ro)->show tacacs session authorization
service: exec
session authorization A-V pairs:
access-level attribute value
read-only priv-lvl 0
read-write priv-lvl 1
super-user priv-lvl 15
This example shows how to display client session accounting state.
C3(ro)->show tacacs session accounting
session accounting state: enabled
authorization Display client session authorization settings.
accounting Display client session accounting settings.