Enterasys SECURESTACK C3, Configuration Manual, Page: 103 / 872

save config
SecureStack C3 Configuration Guide 3-41
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the configuration persistence mode to manual:
C3(su)->set snmp persistmode manual
save config
Use this command to save the running configuration. If applicable, this command will save the
configuration to all switch members in a stack.
Syntax
save config
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to save the running configuration:
C3(su)->save config
dir
Use this command to list configuration and image files stored in the file system.
Syntax
dir [ filename ]
auto Sets the configuration persistence mode to automatic. This is the default
state.
manual Sets the configuration persistence mode to manual. In order to make
configuration changes persistent, the save config command must be
issued as described in “ save config ” on page 3 ‐ 41. This mode is useful for
reverting back to old configurations.