Enterasys SECURESTACK C3, Configuration Manual

Page: 804 / 872

show maclock
26-58 Authentication and Authorization Configuration
Commands
show maclock
Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display MAC locking information for
ge
.1.1.
C3(su)->show maclock ge.1.1
MAC locking is globally enabled
Port Port Trap Aging Max Static Max FirstArrival Last Violating
Number Status Status Status Allocated Allocated MAC Address
For information about... Refer to page...
show maclock 26-58
show maclock stations 26-59
set maclock enable 26-60
set maclock disable 26-61
set maclock 26-61
clear maclock 26-62
set maclock static 26-63
clear maclock static 26-63
set maclock firstarrival 26-64
clear maclock firstarrival 26-65
set maclock agefirstarrival 26-65
clear maclock agefirstarrival 26-66
set maclock move 26-66
set maclock trap 26-67
port ‐ string (Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 7 ‐ 1.