95
Push Talk
e
If the caller sets "Caller ID setting" (p.103) or "Set Caller ID" (p.102) to "ON" and then makes a PushTalk call, the
participants' phone numbers are notified to all the other participants (including participants added during a
PushTalk call). Since phone numbers are important information, be careful when notifying them.
<Make PushTalk>
Making a PushTalk Call
d
Dialing makes a one-to-one call between you and the other party. To make a group call, use the PushTalk
phonebook and dial.
→
p.101
a
Enter the other party's phone
number
X
@
[
P
]
When the other party answers the call, the participation tone
sounds and the "PushTalk talking" screen appears, then his/
her voice comes out of the speaker.
■
To cancel the hands-free operation
X
o
［
］
Hands-free
→
p.59
b
To end the call, press
y
Ending a PushTalk call
→
p.98
e
You cannot make a PushTalk call during a voice call, videophone call or data communication.
e
Making a PushTalk call during i-mode communication disconnects the i-mode communication. Making a PushTalk
call while running an i-
α
ppli causes the i-
α
ppli to be exited.
e
When a voice call is received during a PushTalk call, the operation follows the "PushTalk arrival act" settings.
→
p.104
e
When receiving a videophone call, PushTalk call or 64K data communication during a PushTalk call, the missed
record will be logged and the current PushTalk call will continue.
e
The PushTalk call is unavailable for an emergency call (110, 119, 118).
e
When 2in1 is set to Dual mode, the outgoing number selection screen is displayed. Select the number for Number A.
e
When 2in1 is set to B mode, PushTalk is not available.
d
Speaking during a PushTalk call
a
During a PushTalk call
X
Keep holding
@
[
P
]
The start tone sounds indicating that you have the right to speak now.
An error tone sounds if you cannot get the right to speak, e.g. while another member is speaking.
b
Keep holding
@
[
P
] to speak
Keep holding
@
[
P
] after you start holding
@
[
P
] in Step 1 until you finish speaking.
Releasing
@
[
P
] ends your speech, which means that another participant can speak now.
e
The other participants hear your voice only while you press and hold
@
[
P
] to have the right to speak. Releasing
@
[
P
]
releases the right to speak, and the release tone sounds.
e
The speaker's name appears on the screen during the speech.
e
The time is limited for speaking each time you have the right. When the time is about to elapse, a confirmation tone
sounds and then the right expires.
e
If nobody gets the right to speak for a given time, the PushTalk call ends.
e
You can adjust the volume during a PushTalk call.
→
p.74
e
Even if a flat-plug earphone/microphone with switch (optional) is connected to the FOMA terminal, press and hold
@
[
P
] to speak.
e
When a participant presses
@
[
P
] and a confirmation tone sounds, the speaker is charged for the PushTalk charge
(each time he/she has the right to speak).
d
Joining a PushTalk call in progress
Follow the step below to join a PushTalk call in progress later on if you left the call or if you make a
"Disconnected" response while receiving the PushTalk call:
NOTE
NOTE
NOTE
PushTalk talking
ＰｕｓｈＴａｌｋ ｔａｌｋｉｎｇ
０９０ＸＸＸＸＸＸＸＸ
Ｊｏｉｎｅｄ ｎｕｍｂｅｒ １／１
２３ｓ
Ｓｐｅａｋｅｒ
Ｓｔｏｒｅ
ＦＵＮＣ
Ｖ ｐｈｏｎｅ
．
Continued on next page
