91
Voice/Videophone Calls
Starting/Ending remote monitoring
d
To perform remote monitoring, always make a videophone call with the phone number (caller ID) shown
from the FOMA terminal registered as the other ID on the receiving phone.
d
When your FOMA terminal is used to receive remote monitoring calls, images and sound from the dialing
phone are both played.
a
Make a videophone call to the receiving phone
After the ring time set on the receiving phone has elapsed, remote monitoring begins.
Video images from the receiving phone are displayed on the dialing phone and sound is
played through the speaker. By using a flat-plug earphone/microphone with switch
(optional), you can listen to the sound from the receiving phone through the earphone.
■
To answer a videophone call (with a camera image) on the receiving
phone without triggering remote monitoring
X
Press
o
(
) or
r
before the ring time elapses
Press
d
to answer with a substitute image.
b
To end remote monitoring, press
y
The call duration appears and remote monitoring ends.
Pressing
y
on the receiving phone also ends remote monitoring.
e
You can receive a remote monitoring call even when "Dial lock" or "Omakase Lock" is set.
e
A call with the caller ID hidden is received as a normal videophone call instead of a remote monitoring call.
e
Remote monitoring cannot be performed if any of the following functions is set at the same time:
a
Public mode (Driving mode)
a
Manner mode
a
Call rejection/acceptation
*
a
Reject unknown
*
*: When "Call acceptation" is set for a phone number other than the Other ID number, "Call rejection" is set for the
Other ID phone number or the Other ID number is not stored in the phonebook and "Reject unknown" is set
e
Even if Remote monitoring and Record message or Automatic answer are set at the same time and the ring time set
for Record message or Automatic answer is shorter than the one set for Remote monitoring, remote monitoring starts
when a call arrives from the phone number set for remote monitoring.
e
If a flat-plug earphone/microphone with switch (optional) is connected to a FOMA terminal, sound is played through
the earphone and speaker regardless of the "Earphone" setting.
e
The ring tone specifically set for remote monitoring is used and it cannot be changed.
e
The ring tone sounds at the volume set in "Videophone" in "Ring volume". However, if the volume is set to "Silent",
"Level 1" or "Step", the ring tone for remote monitoring sounds at "Level 2".
e
When a remote monitoring call arrives, the incoming call lamp flashes in "Gradation" color and "Standard" pattern,
regardless of the "Illumination" setting.
e
You cannot set Answer hold when a remote monitoring call arrives. Press
y
to end the call.
e
A remote monitoring call is logged in the "Received calls" record as a "remote monitoring call". If remote monitoring
was not triggered by the call, it is logged as a missed videophone call.
e
The receiving phone cannot receive voice or videophone calls during remote monitoring. Voice or videophone calls
made to the receiving phone during remote monitoring are logged as missed calls in the Received calls record, and
the "Missed calls" desktop icon appears on the standby screen.
e
When a FOMA terminal is folded during remote monitoring, the terminal operates as specified in "Setting when
folded". However, if a flat-plug earphone/microphone with switch (optional) is connected to the FOMA terminal, the
"Setting when folded" setting is ignored and a substitute image is sent to the other party when the FOMA terminal
is folded.
e
The cameras cannot be switched on the receiving phone during remote monitoring.
NOTE
Please be considerate of the privacy of individuals around you when taking and sending
photos using camera-equipped mobile phones. If you inconvenience others when using the
FOMA terminal, you may be punished by respective laws or bylaws (such as Public
Nuisance Laws).
１ｍ３２ｓ
Dialing phone
Ｖ ｐｈｏｎｅ
．
