129
Sound/Screen/Light Settings
<Vibrator>
MENU54
Vibrating a FOMA Terminal When a Call or Mail Arrives
You can set a FOMA terminal to use different vibration patterns for voice calls, videophone calls,
PushTalk calls, mails, chat mails and MessageR/MessageF respectively.
a
i
X
"SETTINGS"
X
"Incoming call"
X
"Vibrator"
X
Select any item
b
Select a vibration pattern
A FOMA terminal vibrates in the highlighted pattern.
The following icons shown on the standby screen indicate for which function the FOMA terminal vibrates:
: Shows that vibration starts when a voice call, videophone call or PushTalk call arrives.
: Shows that vibration starts when a mail, chat mail, MessageR or MessageF arrives.
: Shows that both "
" and "
" are set.
e
To enable "Mail", "Chat mail", "MessageR" and "MessageF" in "Vibrator", set the respective items in "Mail/Msg. ring
time" to "ON".
e
When "Vibrator" is set to other than "OFF", take care not to let the vibrating FOMA terminal get close to fire (e.g.
space heater) or fall off a table, etc.
e
When "Ring volume" is set to other than "Silent" and the vibrator is set, the FOMA terminal uses a ring tone and
vibration to notify you of incoming calls or mails. When "Ring volume" is set to "Silent", the FOMA terminal uses
vibration only.
e
The vibration level is always fixed regardless of the ring volume setting.
e
When "Melody linkage" is set, the vibration pattern may not match the main theme.
<Vibrator priority sequence>
e
Priority is assigned as follows for the vibrator when the incoming settings are duplicated:
①
Vibrator for Discern connect
→
p.119
②
Vibrator for Discern group
→
p.119
③
Vibrator setting
<Keypad sound>
MENU30
Setting the Keypad Sound
d
Setting this function to "OFF" also disables the following tones:
a
Warning tone
a
Battery low warning tone
a
Tone emitted when you start adjusting the earpiece volume
a
Alarm clock snooze release tone
d
The keypad sounds at the level set in "Volume" during a call, and fixed at the same level while not on a
call.
d
The confirmation tone sounds regardless of this setting when:
a
You press the assist key or
s
(MEMO/CHECK) with a FOMA terminal folded
a
You shoot a picture (shutter sound, Auto focus lock sound)
a
You start/finish memo playback (the sound emanates from the receiver)
a
You start/finish standby voice memo and voice announce recording (the sound emanates from the
receiver)
d
When setting the keypad sound in "Initial setting" (p.46), select "ON" or "OFF".
Phone
Sets vibration for voice calls or 64K data communication.
Videophone
Sets vibration for videophone calls.
PushTalk
Sets vibration for PushTalk calls.
Sets vibration for i-mode mails, SMS and packet communication.
Chat mail
Sets vibration for chat mails.
MessageR
Sets vibration for MessageR.
MessageF
Sets vibration for MessageF.
Pattern 1
Vibrates in Pattern 1.
Pattern 2
Vibrates in Pattern 2.
Pattern 3
Vibrates in Pattern 3.
Melody linkage
Vibrates in the pattern specified for the melody set as the ring tone. However, if no vibration pattern is
specified for the melody or an i-motion is set as the ring tone or Chaku-Uta-Full
®
, Pattern 2 is used.
OFF
Does not vibrate.
NOTE
Default setting
All OFF
Default setting
ON
Continued on next page
