147
Sound/Screen/Light Settings
Changing the pointer speed
a
Neuropointer screen (p.146)
X
"Speed"
X
Select any item
*1: Adjusts the pointer speed for typical screens such as the list or icon selection.
*2: The settings may not be applicable depending on the i-
α
ppli.
<Illumination>
MENU89
Specifying How the Incoming Call Lamp Flashes for Incoming Calls and Mails
Use this procedure to set the color and pattern (flash pattern) in which the incoming call lamp flashes
when you receive voice calls, videophone calls, PushTalk calls, mails, chat mails or MessageR/
MessageF.
d
You can set different flash colors respectively for incoming calls and messages from particular phone
numbers, e-mail addresses or groups.
→
p.119
d
The flash pattern for
o
and
p
is the same as for the incoming call lamp.
a
i
X
"SETTINGS"
X
"Incoming call"
X
"Illumination"
X
Select any item
e
If "Pattern 1" to "Pattern 4" is selected for a ring tone, the incoming call lamp flashes according to the ring tone
regardless of the settings of this function.
e
If no flash pattern corresponding to the melody is set for a ring tone or Chaku-motion or Chaku-Uta-Full
®
is set, the
"Standard" pattern is used regardless of the "Melody linkage" setting.
e
While you are operating data on a microSD memory card from a PC in "microSD mode" (p.374), the incoming call
lamp flashes in "Color 5" (green) regardless of the settings of this function.
<Incoming call lamp priority sequence>
e
Priority is assigned as follows for the incoming call lamp operation when the incoming settings are duplicated:
①
Illumination for Discern connect
→
p.119
②
Illumination for Discern group
→
p.119
③
Illumination
Simple
X
"Normal" or "High"
X
"YES"
Chooses between two speeds.
Detail
Sets a speed for each screen.
Standard
*1
X
Use
c
to select "I", "L" or "H"
X
Use
v
to adjust the speed
X
"OK"
Speed can be controlled in the range of level 0 (leftmost) to level 11
(rightmost). The more you move the slide to the right, the faster the speed
becomes. The more to the left, the slower it does.
MainMenu
T9/Prediction
Software
*2
Reset
Restores the pointer speed to default.
Default setting
Phone: Color 5 Videophone: Color 5 PushTalk: Color 5 Mail: Color 1 Chat mail: Color 3
MessageR: Color 1 MessageF: Color 1 Pattern: Standard Color setting: Color 1 to 12
Missed info: ON
Set color
Selects the flash color of the incoming call lamp for "Phone", "Videophone", "PushTalk", "Mail", "Chat
mail", "MessageR" and "MessageF".
The incoming call lamp flashes in the highlighted color.
Color 1 to 12: The lamp flashes in the selected color.
Gradation: The lamp flashes in the colors 1 to 12 in numeric order.
Set pattern
Selects the flash pattern of the incoming call lamp.
Standard
Sets the flash pattern to Standard (flashing at 0.5 sec interval).
Melody linkage
Sets the flash pattern to Melody linkage.
Adjust color
Sets the color.
Edit color name
X
Select a color
X
Enter the color name
A color name can contain up to 10 double-byte or 20 single-byte characters.
Adjust color
tone
X
Select a color
X
Use
b
to adjust the color tone
Missed info
Sets whether the incoming call lamp keeps flashing while the icon for missed calls or new mails (i-mode
mail, chat mail, SMS) is displaying (The flashing interval is longer in power saver mode).
NOTE
