287
Function menu (New SMS screen)
e
If you set "SMS input char.", "SMS report req." or
"SMS valid per." in the Mail settings screen, the
setting is retained even after the FOMA terminal is
turned off. However, if you set the "SMS input char.",
"SMS report req." or "SMS valid per." using the
function menu, only one SMS which is currently
setting is available.
e
If "None" is set in "SMS valid per.", the message is
deleted from the SMS Center after resending in a
given period of time.
<Receive SMS>
When You Receive SMS (Short Message)
When the FOMA terminal is in a service area,
SMS is automatically sent to the FOMA terminal
from the SMS Center
c
The received SMS can be stored in the FOMA
terminal up to 1,000 messages together with
i-mode mail.
a
When you receive SMS, the "
"
(white) icon flashes and "Mail
Receiving..." is displayed
After receiving is completed, the number of
messages count is displayed about the received
SMS, i-mode mail, MessageR and MessageF on
the reception results screen.
When "Mail" is selected, the "Received mail list"
screen appears.
No operation for about 15 seconds brings back to
the previous screen. The time for displaying the
reception result screen depends on the "Mail/Msg.
ring time" setting.
The ring tone volume conforms to the setting of
"Mail" under "Ring volume".
e
If the FOMA terminal contains 1,000 received
messages (the total of i-mode and SMS) or exceeds
the storage capacity even less than 1,000 messages,
messages are automatically deleted from the Trash
box and Inbox in chronological order on receiving.
Note that the following mails are not deleted: unread
mails, received mails in protection or i-mode mail and
SMS in the Secret folders. You should protect any
necessary received mail.
→
p.270, 273
e
When the "
"(red) icon is displayed, the FOMA
terminal cannot receive any further i-mode mail or
SMS. To receive a new message, delete an
unnecessary i-mode mail and SMS, or read an
unread i-mode mail and SMS until those icons no
longer appear. A read message is overwritten in
chronological order on receiving.
e
When you receive multiple mails (i-mode and SMS) at
the same time, the FOMA terminal uses the ring tone
and incoming call lamp pattern set to the last item of
mail received.
e
If you receive Short Mail from the mova or other
terminal, the source phone number is displayed. If the
caller ID is not provided, the reason for no caller ID is
displayed.
e
If you receive SMS while playing an i-motion, the
video and sound may be interrupted.
<Priority order for ring tone and incoming call lamp
operations>
e
When receiving SMS, setting priority for the ring tone
and illumination is as follows:
①
"Discern connect" specified for each phone
number
→
p.119
②
"Discern group" specified for each group
→
p.119
"Select ring tone"/"Kisekae Tool setting"
→
p.126,
144, "Illumination"
→
p.147
Viewing received SMS (Short Message)
c
For received SMS, the beginning of the message is
displayed as the subject in the "Received mail list" screen.
c
For received SMS reports, "SMS report" is displayed
as the subject of the "Received mail list" screen.
c
For Voice Mail notices, "Noticecall voicemail" is
displayed as the subject of the "Received mail
list" screen. For the number of voice mail
messages notices, "Noticecall Videophone" is
displayed as the subject of the "Received mail
list" screen.
c
Set "3D display setting" to "ON" to select the
desktop icon of a new mail, and an icon
expressing the emotion that matches the
message body and pictographs included in the
subject are displayed as a 3D animation.
Send
Sends SMS
Preview
Allows you to check the destination
address and contents of SMS before
sending a mail.
Save
Saves SMS in editing into Draft. SMS
can be saved up to 20 messages
together with the i-mode mail. You can
send SMS in Draft later.
SMS report
req.
(default: OFF)
Sets whether to request an SMS report
after sending an SMS. Select "ON" or
"OFF".
SMS valid.
per.
(default: 3
days)
Sets the storage period at the SMS
Center in the case where SMS is not
carried to the destination because of the
out-of-service and such. "None" to "3
days" can be selected.
SMS input
char.
(default:
Japanese)
Sets the input method of the SMS
message. Up to 70 characters of all the
double bytes and single bytes can be
entered in Japanese. Up to 160 single-
byte alphanumeric characters can be
entered in English.
Erase
message
Deletes only the message body.
Delete
Deletes SMS in editing.
NOTE
Ｍａｉｌ
Ｒｅｃｅｉｖｉｎｇ．．．
Ｍａｉｌ １
ＭｅｓｓａｇｅＲ
０
ＭｅｓｓａｇｅＦ
０
Ｒｅｃｅｉｖｅｄ ｒｅｓｕｌｔ
Ｂａｃｋ
Ｎｅｗ Ｍａｉｌ
NOTE
Continued on next page
