465
Network Services
<Multi Number>
Multi Number
Besides Basic Number, you can add up to two
numbers (Additional Number 1 and 2) as your
FOMA terminal phone number.
c
Cannot be used at the same time as 2in1.
c
The name corresponding to Multi Number (Basic
Number, Additional Number 1 or 2) appears on
the dialing or receiving screen.
c
When you dial using the Redial/Dialed calls or
Received calls record, the Multi Number logged
in the record appears on the screen and will be
used for dialing.
e
Additional numbers are notified at the time of
application for Multi Number.
e
For more details, see "Mobile Phone User's Guide
[Network services])".
e
Switch a phone number in Set Multi Number enables you to
use the specified phone number for all calls you will make.
e
You can also switch phone numbers each time
making a call.
→
p.466
e
You can receive voice calls, videophone calls or 64K
data communications that are made to Additional
Number 1 or 2. You can also set a ring tone for each
phone number.
→
p.465
e
Selecting "Multi Number" from the function menu to
make a call will display the item selected when making a
call ("Basic Number" or registered name of Additional
Number 1 or 2) on the Redial (detail) screen or Dialed
calls record (detail) screen even if you have not
subscribed to "Multi Number".
If you make a call without using the function menu, only
the dialing phone number is displayed in the Redial/
Dialed calls.
e
When you use a phone number from the Redial/Dialed
calls record to make a call, the call is made from the item
("Basic Number", Additional Number 1 or 2) displayed in
the record. If only the dialing phone number is displayed
in the record, the call is made from the number set in
"Set Multi Number" (p.465).
e
When you make a call using Received calls record,
the call is made from the number logged in the record
regardless of the "Set Multi Number" (p.465) setting.
e
When a call is received by Additional Number 1 or 2, the
registered name of the number is displayed on the
receiving screen or on the received calls detail screen.
e
In Public mode (Driving mode), if an incoming call is
received by Additional Number 1 or 2, the operation
performed is the same as that of Basic Number.
→
p.77
Using Multi Number
a
i
X
"SERVICE"
X
"Multi Number"
X
Select any item
*: The respective registered names are displayed if they are set.
e
The settings in "Number setting " and "Select ring
tone" are stored even when replacing FOMA card to
another or reattach the card.
<Number Setting>
e
The name is displayed when you specify the Multi Number
settings and select a phone number used for a call.
<Select ring tone>
e
When the ring tone settings are duplicated, the
priority applies.
→
p.128
Function menu (Multi Number setting screen)
NOTE
Subscription
Required
Set Multi Number
Sets a phone number to be used for
making a call normally.
• Basic
Number
Sets your contracted number (Basic
Number) to be used for making a
call.
• Additional
Number1
*
Sets the additional number to be
used for making a call.
• Additional
Number2
*
Check setting
Checks the "Set Multi Number" setting.
Number Setting
X
Highlight an item to register (or
change) an additional number
and press
o
(Edit)
X
Enter a
name
X
Enter an additional
number
Registers the additional number you
were notified when you applied for
Multi Number for the FOMA
terminal.
A name can contain up to 8 double-
byte or 16 single-byte characters.
An additional number can contain
up to 26 digits.
a
The "Multi Number setting"
screen function menu displayed
when you select "Number
Setting"
→
p.465
Select ring tone
Sets the ring tones for Additional
Number 1 and 2.
"Changing Ring Tones"
→
p.126
NOTE
Edit
Sets an additional number.
Delete this
Deletes the highlighted additional number.
Delete all
Deletes all the registered additional numbers.
