Dell PowerEdge T610, Hardware Owner'S Manual

Page: 54 / 206

54
About Your System
Warning Messages
A warning message alerts you to a possible problem and prompts you to
respond before the system continues a task. For example, before you format a
drive, a message will warn you that you may lose all data on the drive.
Warning messages usually interrupt the task and require you to respond by
typing
y
(yes) or
n
(no).
NOTE:
Warning messages are generated by either the application or the operating
system. For more information, see the documentation that accompanied the
operating system or application.
Diagnostics Messages
The system diagnostic utilities may issue messages if you run diagnostic tests
on your system. See "Running the System Diagnostics" for more information
about system diagnostics.
Write fault
Write fault on
selected drive
Faulty USB device, USB
medium, optical drive
assembly, hard drive, or hard-
drive subsystem. Replace the USB medium or
device. Ensure that the USB,
SAS backplane, or SATA
cables are properly
connected.
See "Troubleshooting a USB
Device," "Troubleshooting
an Internal SD Card,"
"Troubleshooting an Optical
Drive," and
"Troubleshooting a Hard
Drive."
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
"Glossary."
Table 1-2. System Messages (continued)
Message Causes Corrective Actions
book.book Page 54 Tuesday, September 15, 2009 10:08 AM