Dell 6 series User Manual Download Page 77 | Manualshive

Page: 77 / 160

background image

Configuring and Managing RAID

77

Configuring and Managing RAID

Dell™ OpenManage™ storage management applications enable you to
manage and configure the RAID system, create and manage multiple disk
groups, control and monitor multiple RAID systems, and provide online
maintenance. The management applications for PERC 6 include:

•

Dell OpenManage Storage Management

•

Dell Serial Attached SCSI (SAS) RAID Storage Manager

•

BIOS Configuration Utility (Ctrl+R)

Dell OpenManage Storage Management

Dell OpenManage storage management is a storage management application
for Dell systems that provides enhanced features for configuring a system's
locally-attached RAID and non-RAID disk storage. Dell OpenManage storage
management application enables you to perform controller and enclosure
functions for all supported RAID controllers and enclosures from a single
graphical or command-line interface without requiring the use of the
controller BIOS utilities. The graphical user interface (GUI) is wizard-driven
with features for novice and advanced users, and detailed online help. Using
Dell OpenManage storage management application, you can protect your
data by configuring data-redundancy, assigning hot spares, or rebuilding failed
physical disks. The command line interface available on selected operating
systems to perform RAID management tasks is fully featured and scriptable.

Dell SAS RAID Storage Manager

SAS RAID Storage Manager is a storage management application for Dell
PowerEdge™ SC systems and Dell Precision™ workstations. SAS RAID
Storage Manager configures virtual disks, and monitors and maintains PERC
6 controllers, battery backup units, and other devices running on systems and
workstations. You can perform these tasks using the application’s GUI.

Dell_PERC6.2_UG.book Page 77 Wednesday, June 24, 2009 6:08 PM

«
...
75
76
77
78
79
...
»

Summary of Contents for 6 series

































































































































































Reviews:

No comments

Related manuals for 6 series

All in One Printer

Brand: Baracoda Pages: 42

Brand: Patton electronics Pages: 51

Brand: Direct IP Pages: 76

Brand: OpenVox Pages: 13

Anybus Communicator ABC4021

Brand: HMS Networks Pages: 60

dspstak 21262sx

Brand: Danville Signal Processing Pages: 35

Brand: C-Smartlink Pages: 7

Brand: SeaLevel Pages: 21

PCMCIA High Speed Serial Card CE 232HSPCC

Brand: B&B Electronics Pages: 14

Brand: Comtrend Corporation Pages: 4

Brand: RAK Pages: 14

Brand: IBASE Technology Pages: 49

Brand: Classe Audio Pages: 70

Brand: Arduino Pages: 10

Ultra Wireless AWN-8030

Brand: Adaptec Pages: 57

GigaSpire BLAST u6

Brand: Calix Pages: 9

Brand: Alcatel-Lucent Pages: 8

EXTREME PROCESSOR UNIT

Brand: Jefftron Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands