Dell 6 series User Manual Download Page 72

Page: 72 / 160

Driver Installation

Click

If you want to install from another driver update medium, continue with
the following steps.

The system displays the message

PLEASE CHOOSE DRIVER UPDATE

MEDIUM

Select the appropriate driver update medium.
The system selects the driver from the disk and installs it.

NOTE:

Suse Linux Enterprise Server 9 Gold

media is required when you install

any Suse Linux Enterprise Server 9 service pack.

Installing the RPM Package With DKMS Support

Perform the following steps to install the RPM package with DKMS support:

Uncompress the gzipped tarball driver release package.

Install the DKMS package using the command:

rpm –ihv dkms-

<version>.noarch.rpm

Install the driver package using the command:

rpm –ihv

megaraid_sas-<version>.noarch.rpm

NOTE:

Use

rpm -Uvh

<package name>

when updating an existing

package.

If the previous device driver is in use, you must reboot the system for the
updated driver to take effect.

Verify that the driver has been loaded.

Dell_PERC6.2_UG.book Page 72 Wednesday, June 24, 2009 6:08 PM

Summary of Contents for 6 series

































































































































































Search results

Summary of Contents for 6 series

Reviews:

Related manuals for 6 series

Brands by name

Popular brands

Dell 6 series, User Manual

Search results

Summary of Contents for 6 series

Reviews:

Related manuals for 6 series

Brands by name

Popular brands