Dell 6 series User Manual Download Page 61

Page: 61 / 160

Installing and Configuring Hardware

Close the top cover of the Modular Blade system. For more information on
closing the top cover of the Modular Blade system, see your system’s

Hardware Owner’s Manual

or the

User’s Guide

Reinstall the Modular Blade system in the Modular Blade system chassis.
For more information on reinstalling the Modular Blade system in the
Modular Blade system chassis, see your system’s

Hardware Owner’s

Manual

or the

User’s Guide

NOTE:

The CERC 6/i Integrated does not provide support for a battery backup unit.

NOTE:

For the latest list of firmware and installation instructions, see the system

documentation located at the Dell Support website at

support.dell.com

Dell_PERC6.2_UG.book Page 61 Wednesday, June 24, 2009 6:08 PM

Summary of Contents for 6 series

































































































































































Search results

Summary of Contents for 6 series

Reviews:

Related manuals for 6 series

Brands by name

Popular brands

Dell 6 series, User Manual

Search results

Summary of Contents for 6 series

Reviews:

Related manuals for 6 series

Brands by name

Popular brands