Dell 6 series, User Manual

Page: 14 / 160

14
WARNING: Safety Instructions
You can also take the following steps to prevent damage from electrostatic
discharge:
• When unpacking a static-sensitive component from its shipping carton, do
not remove the component from the antistatic packing material until you
are ready to install the component. Just before unwrapping the antistatic
package, be sure to discharge static electricity from your body.
• When transporting a sensitive component, first place it in an antistatic
container or packaging.
• Handle all electrostatic sensitive components in a static-safe area. If
possible, use antistatic floor pads and work bench pads.
SAFETY: Battery Disposal
Your system may use a nickel-metal hydride (NiMH), lithium
coin-cell, and/or a lithium-ion battery. The NiMH, lithium coin-
cell, and lithium-ion batteries are long-life batteries, and it is
possible that you will never need to replace them. However, should
you need to replace them, see the instructions included in the
section "Configuring and Managing RAID" on page 77.
NOTE:
Do not dispose of the battery along with household waste. Contact your
local waste disposal agency for the address of the nearest battery deposit site.
NOTE:
Your system may also include circuit cards or other components that
contain batteries. These batteries too must be disposed of in a battery deposit site.
For information about such batteries, see the documentation for the specific card or
component.
Taiwan Battery Recycling Mark
Dell_PERC6.2_UG.book Page 14 Wednesday, June 24, 2009 6:08 PM